Floor cover, self-adhesive 1x25m

The self-adhesive stair and floor protector Power Cover Original features a surface made of very dense synthetic fiber fabric (350g/m2), which withstands high levels of wear and tear. The texture of the surface ensures a secure step, thus enhancing safety. The bottom of the product consists of a waterproof and self-adhesive membrane that works on vertical surfaces as well. Therefore, no tape is required for installation. When removed, Power Cover leaves no marks or adhesive residue on the protected surfaces, and moreover, you can reuse the product at your next location. The product traps dirt, which is easy to vacuum off. The product contains no harmful substances.

The product is installed directly from the roll and can be cut to the desired length. For larger areas, Power Cover should be installed side by side. If a 100% moisture seal is desired, Power Cover should be overlapped by 10cm or the seams should be taped with suitable protective tape.

Applications include floors, stairs, elevator walls and doors, windows, thresholds, frames, ceilings, etc. Suitable for both indoor and outdoor use.

Technical specifications
- Material weight: 350g/m2
- Thickness: approx. 2.5mm
- Puncture resistance (CBR): 4.0kN
- Cone drop test ISO 13433: 10mm
- Water permeability: Impermeable
- Water absorption capacity: 430% relative to the product's own weight.
- Product storage: In a dry place.