|
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect® with ShareLive™ video call (sold separately), process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.
Read more
Features of the Fluke 789: - 24 V Loop power supply - Very large dual display - Enhanced backlight with 2 brightness settings - 1200 ohm drive capability on mA source - HART mode setting with loop power and a built-in 250 ohm resistor - 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check - Externally accessible fuses for easy replacement - Infrared-port to process data in FlukeView Forms (V2.1) software - Precision 1000 V, 440 mA True-RMS digital multimeter - 0.1% dc voltage accuracy - 0.05% dc current accuracy - Frequency measurement to 20 kHz - Min/Max/Average/Hold/Relative modes - Diode Test and Continuity Beeper - Simultaneous mA and % of scale readout - 20 mA DC current source / loop calibrator / simulator - Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp - Externally accessible battery for easy battery changes Safety conformance: - Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards. Mechanical and General Specifications - Size: 50 x 100 x 203 mm - Weight: 610 g - Batteries: 4 AA alkaline batteries - Warranty: 3 years - Battery life: 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) - Shock and vibration Random, 2 g, 5-500 Hz 1 meter drop test |
Search