Kiilto Leakfinder 400ml

Kiilto Leakfinder 400ml. Primer for concrete floors. Basic treatment agent for porous surface materials such as mosaic concrete and unglazed stone materials. Can also be used to saturate an old, highly porous linoleum floor. Not suitable for dry-press tiles.

Before treating the surface with Kiilto Pro Kisu BT, ensure that the surface is porous, clean, and dry. If the surface is too tight or dirty, Kiilto Pro Kisu BT will not absorb properly and may detach after drying. Previously used oil-based stone treatment products can also inhibit the absorption of Kiilto Pro Kisu BT primer. Please note that very porous floors may require a longer drying time (up to 24 hours) after washing.

Turn off the floor heating well in advance. Apply one coat of Kiilto Pro Kisu BT primer using a floor dryer and allow it to absorb. Wipe away any excess, unabsorbed product. Avoid excessive use of the primer; it must be completely absorbed into the surface material. A second coat can be applied if necessary. If a visible layer forms on the surface, it can be removed immediately after drying by washing it with Kiilto Pro Linoleum Wax Remover (dosage: 1 dl per 1 l of water) or allowing it to wear away.

After drying, the floor treated with Kiilto Pro Kisu BT can and is recommended to be waxed, for example, with Kiilto Pro Silk Gloss, which is a suitable wax.

Drying time: 1–24 hours.
Coverage: 25–50 m² per liter.
Shake the can well before use, spray onto the area to be treated.