Kiilto Pro Teho A 100 5L

Highly soiled hard surfaces can be cleaned using both manual and machine methods. Effectively tackles soot and particulate dirt. As a versatile cleaner, Kiilto Pro Teho A 100 is also suitable for the startup, maintenance, and deep cleaning of rubber floors according to separate instructions.

Maintenance cleaning dosage 1 - 4 ml / 1 l of water depending on soiling
Startup cleaning and surface washing dosage 6-8 ml / 1 l of water
Deep cleaning, adherent/stubborn dirt dosage 20-40 ml / 1 l of water
For nora by Interface rubber floors startup cleaning, refer to separate instructions

Maintenance cleaning. Dose according to soiling. Prepare the cleaning solution according to instructions, pre-prepare cleaning textiles, and wipe surfaces clean. In machine methods, prepare the solution in the clean water tank of the combined machine and clean the floors.

For the startup cleaning and surface washing of floors. Prepare the solution according to instructions, apply the solution to surfaces and allow to act for 3 - 5 min. Use a floor care machine or a combined machine with the indirect method. Use a red pad. Vacuum the solution off and damp wipe the surface or operate the combined machine with clean water. Perform surface treatment if necessary.

Deep cleaning, adherent/stubborn dirt. Prepare the solution according to instructions, apply to surfaces and allow to act for 5 - 10 min. Clean with a floor care machine or scrub manually, vacuum the solution off and rinse surfaces thoroughly and dry.

Use a dispensing device, pump, or measure for dosing.