Kiilto Teho A 100 cleaner 1L

High-traffic hard surfaces, cleaned using manual and machine methods. Effectively tackles soot and particulate dirt. The versatile Kiilto Teho A 100 is also suitable for the initial, maintenance, and deep cleaning of rubber floors as per separate instructions.

Maintenance cleaning dosage 1 - 4 ml / 1 l of water according to dirt level
Initial cleaning and surface washing dosage 6-8 ml / 1 l of water
Deep cleaning, stubborn/embedded dirt dosage 20-40 ml / 1 l of water
Initial cleaning for nora by Interface rubber floors, see separate instructions

Maintenance cleaning. Dosage according to dirt level. Prepare the cleaning solution as per the instructions, pre-prepare cleaning textiles, and wipe surfaces clean. For machine methods, prepare the solution in the clean water tank of the scrubber and clean the floors.

For initial cleaning of floors and surface washing. Prepare the cleaning solution as per the instructions, apply the solution to the surfaces, and let it sit for 3 - 5 minutes. Clean with a floor care machine or scrubber using the indirect method. Use a red pad. Extract the solution and damp wipe the surface or clean the surface with a scrubber using clean water. Perform surface care treatment if necessary.

Deep cleaning, stubborn/embedded dirt. Prepare the cleaning solution as per the instructions, apply to surfaces, and let it sit for 5 - 10 minutes. Clean with a floor care machine or scrub manually, extract the solution, rinse surfaces thoroughly, and dry.

Use a dispenser, pump, or measuring device for dosing.