Lever gauge 0,2 x 0,002

This dial gauge is a horizontal type with a lever mechanism, which offers excellent readability and versatile use in challenging measurement situations. It is based on an analogue reading principle with a scale interval of 0.002 mm, a measuring range of 0.2 mm, and a scale of 0-100-0, which means that the zero point is positioned at the center of the scale and both positive and negative deviations are easily detectable.

The front of the body has a non-reflective, flat crystal surface to improve reading clarity. Additionally, the O-ring sealing in the frame construction protects the gauge against oil and dust, increasing its reliability in industrial environments. The length of the contact point is marked on the dial, which facilitates ordering a spare tip; this indicates to the user which tip is recommended for use to ensure accurate scale readings.

The dimensions of the gauge body are: Diameter: Ø 40 mm, Stem: Ø 8 mm, L1: ≈ 18.7 mm, and L2: ≈ 15.2 mm, making it compact and easy to place in a measuring environment. The maximum permissible error (MPE) for a 10 scale unit is 2 µm, for ½ turn 3 µm, repeatability 1 µm, and hysteresis 2 µm. The weight is about 45 g, and the measuring force is less than 0.3 N.

According to the manufacturer, this model is a very good choice when measuring narrow or deep areas where a traditional vertical micrometer or thicker gauge will not fit or where easy reading of the scale in the horizontal position is desired. The gauge's performance, visibility, and protection make it a reliable partner for metrology laboratories, machining, or quality control.