Multimeter true rms

• Bahco BMMTRMS1 multimeter allows you to measure direct and alternating voltage, amperage, frequency, resistance, capacitance, conductivity, polarity, and temperature.
• Contents:
• DC voltage range: 600 mV ±0.5%, 6/60/600 V ±0.8%, 1,000 V ±1.0%
• AC voltage range: 600 mV/6 V/600 V ±1.0%, 1,000 V ±1.5%
• DC current: 600 μA / 6 mA / 60 mA / 600 mA / 6 A / 10 A ±1.5%
• CAT class: CAT III 1,000 V / CAT IV 600 V
• Resistance: 600 Ω / 6 KΩ / 60 KΩ / 600 KΩ / 6 MΩ ±0.5%, 60 MΩ ±1.5%
• Capacitance: 6 nF ±3.0%, 600 nF / 6 µF / 60 µF / 300 µF ±5.0%
• Duty cycle frequency: 10 Hz~1 MHz ±(0.1% +3)
• Sinusoidal wave frequency: 10 Hz~10 KHz ±(0.05% + 8)
• Operating cycle: 1 %~99 %
• Temperature: -55...1,000 °C ±(2 %+2)
• Overload protection: 0.63 A/1,000 V in the range of 1 µA and mA and 10 A/1,000 V in the 10 A range
• Calibration report
• 1 battery 6F22 (9 V) included
• Technical specifications:
• True RMS measurement
• Non-contact voltage function
• Relative measurement
• Automatic shutdown
• Data hold
• Backlight function
• Automatic/manual measurement range
• Polarity indicator
• Diode test
• Continuity test
• Charge indicator light
• Includes multimeter case and strap holder
• Needle test silicone sensor wires, 1 m: Cat III 1,000 V, 10 A
• Alligator test probe wires, spring-loaded copper jaws with a wide 12.7 mm (0.5 inch) opening and serration, 1 m: Cat III 1,000 V, 10 A
• T-probe wire, 1 m
• Multimeter computer connection, USB cable, 1.2 m