Powered respirator 3M PF2-619E Start kit
|
The 3M™ Powered Respirator PF2-600E is designed for heavy-duty use and provides robust and reliable respiratory protection for those working in industrial environments.
Read more
Features: - Powered Respirator 3M™ PF2-619E Starter Kit without facepiece. - Compatible with 3M™ Versaflo™ S-Series Hoods and Headgear, including Helmet-in-Hood, 3M™ Versaflo™ M-Series Faceshields and Helmets, 3M™ Reusable Respirator FF-300, 3M Reusable Respirator FF-600 and 3M™ DT Series Filters. - Audible and visual alerts warn the user when the battery is low or the airflow drops below the manufacturer's recommended target airflow. - OLED display that shows battery status and filter status during operation and displays a service indicator warning if a fault occurs. - 160 l/min air flow rate - Simple button operation. - The integrated battery is located in the frame of the fan unit and the battery can be charged in place. (battery replacement only at a service point) - Rechargeable lithium-ion battery 14.4 V, 46.64 Wh - The device is rated IP 63 when the motor is running and the filters and breathing hose are connected. The rating is IP 65 when the motor is not running and the filters and breathing hose are connected. The rating is IP 67 with cleaning plugs. This means that it can be cleaned by spraying when the power is on and immersed in water for cleaning when the cleaning plugs are installed. - Includes: Fan PF2-600E, battery, charger, air hose BT-30, 2x particle filter DT-1135E, 2x pre-filter & holder, support belt and air flow meter - Note! When using the blower with a full face mask FF-301/FF-302 or FF-601/FF-602/FF-603, the air hose 10660056459 is required. - Approval facepieces and efficiency classes: - Hoods: S-655/S-657/S-757/S-855E TH3 - Hoods: S-133/S-333G/S-433/S-533 TH3 - Hood with safety helmet: S-865E TH3 - Facepieces S-665/S-667/S-767 TH3 - Face shield/helmets: M-200/M-300/M-400 TH2 - Full face masks: FF-300/FF-600 TM3 |