Ready kit 3M PF2-600E-ASB-FF-302 Asbestos kit
|
The 3M Powered Respirator System Asbestos Kit PF2-600E-ASB-FF-302 is designed for demanding applications including asbestos removal and remediation.
Read more
- Pre-packaged PF2-600E-ASB-FF-302 asbestos kit with full face mask. - Specifically designed for asbestos removal work where compressed air respiratory protection is not required. - Easy-to-clean PVC belt - The device warns the user with an audible and visual signal if the battery charge is low or the airflow drops below the manufacturer's recommended target airflow. - OLED display that shows battery status and filter status during operation and displays a service indicator warning if a fault occurs. - 160 l/min airflow rate - Simple button operation. - The integrated battery is located in the frame of the blower unit and the battery can be charged in place. (battery replacement only at service point) - Rechargeable lithium-ion battery 14.4 V, 46.64 Wh - The device is rated IP 63 when the engine is running and filters and breathing hose are connected. The rating is IP 65 when the engine is not running and filters and breathing hose are connected. The rating is IP 67 with cleaning plugs. This means that it can be cleaned by spraying when the power is on and immersed in water for cleaning when the cleaning plugs are installed. - PF2 949 adapter for use with Versaflo hoses Note: In order to connect a 3M™ Versaflo M Series or compatible 3M™ Versaflo S Series headgear to the PF2 602E ASB blower, the existing DIN40 breathing hose must be replaced with a 3M Versaflo Bayonet connector PF2 949 to be compatible with the Versaflo breathing hose. This replacement should only be done by an authorized service center. - The 3M FM FF-302 full face mask offers a good field of vision - EN 12942 TM3 approved combination (PF2-600E-ASB blower and FF-302 full face mask) - Includes PF2-600E-ASB powered respirator, FF-302 full face mask, 2 x PF 10 P3 DT-1235E particle filters, 2x pre-filter & holder, PVC belt and airflow meter. |