Silicone adhes. seal T101/7T Brown

- Material: Silicone
- Hardness: 65 Shore A
- Operating temperature: -50 °C….+180 °C
- Weather resistant
- Limited chemical resistance
- Colors: white, black, brown.
- Silicone P-seal tape 7 mm
- Packaging: 100 m/roll
- Installation temperature: +15°C …+ 30°C
- Bonding surfaces must be dry, clean, and grease-free
- Bonding is ensured by pressing carefully. The best adhesion is achieved on the first application.
- The tape is intended only for temporary fixing of the product during installation; the final fixing of the product should be ensured by other means
- The tape is not suitable for hot conditions (over 65 °C) or surfaces containing plasticizers.

When ordering, please note that there are two strips side by side on the roll, and these are counted together. There is a total of 100m of tape in one roll. If you need, for example, a 2m continuous length, then order 4m.