Submers. pump STP2-500 SET 205L/min

Submersible pump STP2-500 set is designed for pumping liquids containing sand, mud, and sludge. It is supplied as a complete package: the pump, a 15 m hose with fittings, and an impact-resistant plastic case. Also included are a 10 m rope and an approved impact-resistant plug at the end of a 10 m power cable (3×1.5mm²).The pump body is cast iron, ensuring excellent wear resistance and high flow capacity. The impeller is made of polyurethane, and a 10 mm clearance between the impeller and the pump body ensures high flow rates and stable pumping performance.The 10 mm holes in the bottom inlet prevent larger particles from reaching the impeller, and a thermal protection switch stops the pump if it overheats, meaning the pump can be run dry momentarily without risk of damage.The pumps are designed for easy maintenance. The impeller is accessed by removing just 3 screws. Especially suitable for: Pumping sand, mud, and sludge. Dewatering construction sites with solid matter. Emptying tanks and excavations. Dewatering low-lying areas where water contains impurities. Discharge size: 2", Rated voltage: 230V.Motor power: 0.4kW. Max. flow: 205L/min, Max. head: 12m, Max. particle size: 10mm. Hose length: 15m (included in package), Max. pressure (0 L/min): 1.2 Bar @12m. Min. pressure: ≈ 0 @0m.Max. liquid temperature: 40°C, Max. submersion depth: 6m.