DK 250 X 30 X 40/12

Types DK ja PDE

Operating conditions

PDE-piston

Pneumatics:

Pressure:= 10 bar

Temperature: -25°C...+80°C

Speed:= 0,5 m/s

Medium: Oil lubricated air

Hydraulics:

Pressure:= 40 bar

Temperature: -25°C...+100°C

Speed:= 0,5 m/s

Medium:Oil lubricated air, dry air (cylinder should be permanent lubricated during installation)

.

TypePDEP without expansion-springs.

-------------------------------------------------------------------------------------------------------------



DK-piston

Pressure=16 bar (pneumatiikka)

Temperature -30°C...+80°C

Speed=1 m/s

Medium:Oil lubricated air, dry air (cylinder should be permanent lubricated during installation)

.

TypeDP, complete piston with integrated cushioning. Pressure=12 bar

------------------------------------------------------------------------------------------------------------



Materials

NBR-based elastomer vulcanized to a metal disc. Type PDE includes spring (AISI 304)

Installation

The PDE and DK pistons are locked into the cylinder using a locknut to prevent loosening of the piston.

Due to the sharp spring lip, the PDE piston can be used in both hydraulics and pneumatics with oil lubricated air.

Due to the round lip, the DK piston can be used with dry air. In this case the cylinder should be permanent lubricated appropriately.

Advantages

PDE-piston

- No corrosion

- Can be used in pneumatic and hydraulic

- Easy to assemble to the rod



DK-piston

- No corrosion due to complete elastomer covering

- Low friction and smooth movement because the structure of the sealing lip maintains lubrication

- Instant reaction to pressure increases due to pressure grooves in the seal

- Easy to assemble to the rod without traditional sealing elements